Home > Products > Electromagnetic > 6600 Series > Specifications
 

Functional Specifications

Fluid Types Conductive Liquids > 5uS/cm
Fluid Pressure 150 PSI, Consult factory for higher ratings
Fluid Temperature PTFE (Teflon): -4 to 176 F Integral
PTFE (Teflon): -4 to 248 F Remote
Hard Rubber (Ebonite) 32 to 158 F
Vacuum Limits Consult Factory
Low Flow Cut-Off Set at 0.164 ft/sec (typical)
Magnetic System Pulsed DC
Voltage 90VAC to 265VAC, 50/60 Hz
Outputs
  1. Current - 4-20mA DC; 800 ohms max
  2. Pulse - Open collector 24 VDC; 200 ohms min load, programmable "on" time from 1 to 99msec.
    1 Pulse = The least significant digit on the totalizer
  3. Frequency = 0-1000Hz
    1000Hz = programmed full scale flow rate
  4. Relays - Two SPDT 2A @ 230VAC,
    #1 - for high flow or bi-directional
    #2 for low flow or empty pipe Empty Pipe Detection also indicated as "EPD" on display
Bi-directional Flow also indicated as "BDF" on display; forward(+) & reverse(-) indication with seperate totalizers

Performance Specifications

Accuracy +/- 0.5% of rate over 10:1 turndown 1/2" to 12"
+/- 1.0% of rate over 10:1 turndown 14" to 24"
Repeatability +/- 0.1% of full scale
Full Scale Flow 1.6 to 32 ft/sec
Response Time 2 sec
Velocity Range 0.16 to 32 ft/sec
Agency Approvals FM3810 (General Purpose) for 1/2" to 24"
FM3611 (Class 1 Div II, Group C&D) for 1/2" to 6"
Protection IP 67 (1 meter immersion in water for 30 minutes)

Physical Specifications

Liner PTFE (Teflon): 1/2" to 12"
Hard Rubber (Ebonite): 3" to 24"
Electrodes Hastelloy C (standard)
SS316L, Titanium, Platinum-Rh, and Monel (optional); Consult factory for more materials
Metering Tube Not wetted - 304 SS
Coil Housing Not wetted - Carbon Steel, Polyurethane painted
Flanges Not wetted - Carbon Steel, Polyurethane Painted; SS304 (optional)
Electronics Housing Not wetted - Cast Aluminum, Polyurethane painted
Mounting Vertical, horizontal, or angle.
Pipe must be full.
Grounding rings not required.
Pipe Requirements Upstream: 5 X ID
Downstream: 3 X ID
(See IOM Manual M600)
Process Connections ANSI Class 150 RF (standard) ANSI Class 300 RF (optional)

Electronics Specifications

Temperature -4 to 140 F
Connections 1/2" NPT

Download Technical Specifications Sheet
Download Installation, Operation, & Maintenance Manual

The above files are in PDF format. You will need Adobe Acrobat Reader 4.0 or above to read them. If you do not have Adobe Acrobat Reader, you may download it here.

PLEASE NOTE: If you have trouble opening the PDF file: First right-click on the title, choose "Save Target As..." and save the file to your computer. Then open the file using Adobe Acrobat Reader. Adobe Acrobat Reader is a registered trademark of Adobe Systems Inc.